HOME
Product Introduction
The installation angle of the spiral sand water separator is between 20°and 30°.The sand water mixture enters the water tank through the inlet pipe,and the particles with a higher density(such as sand particles)in the mixture settle at the bottom of the spiral groove due to their own weight.Under the push of the spiral,the material rises along the inclined U-shaped groove bottom,and after leaving the liquid surface,continues to move up for a distance.The water in the sand particles gradually flows back to the water tank in the gap of the spiral groove,and the sand particles gradually dry at the discharge port,relying on their own weight to fall into other conveying devices.The supernatant continuously flows out from the drainage pipe.Achieve the goal of sand water separation.
Product Usage
Used for sand water separation of the sand water mixture discharged from sedimentation tanks in urban sewage treatment or industrial wastewater treatment.It can separate particles with a diameter of≥0.2mm and has a high separation efficiency.